Technology
The combination of the best commercial-off-the-shelf (COTS) technology and proven military hardened design techniques adds up to the most rugged and durable solid-state disks available.
Features
Benefits

Rugged Anodized Aluminum Case

Rigid >1mm thick Printed Circuit Board mounted by 8 screws

Underfill on all Ball Grid Arrays

Highest levels of Shock and Vibration resistance in the COTS industry, independently verified through Mil-STD-810 testing

Industrial temperature SLC NAND Flash

High data retention and write endurance over a wide temperature range to ensure your data is there when you need it

Secure Erase with Configurable Erase Pins

Fast sanitization of confidential data with the ability to emulate legacy SSD drives

Optional Conformal Coating and Gel-Fill

Extreme moisture, shock and vibration resistance

High Reliability Tin-Lead Solder (SnPb63)

Long-term Reliability with no concern about “tin whiskers”

Protocol

Comtech productions SSDs support PATA, mSATA, SlimSATA, SATA II/III, and PCIe interfaces to support customer requirements. Please contact us for custom interface requirements.

Form Factor

Form factors supported in production SSDs are:

  • 2.5” – fits standard 2.5 inch drive bay
  • mSATA – utilizes mSATA socket typically located on motherboard,
  • SlimSATA – utilizes standard SATA connector
  • M.2 – utilizes M.2 socket typically located on motherboard
Security

Various secure erase options are offered:

  • Fast Erase (Security Erase Unit)
  • DOD 5220.22-M
  • DOD 5220.22- M Sup1
  • NSA 130-2
  • ARMY AR380-19
  • Navy NAVSO P-5239-26
  • Air Force AFSSI-5020
  • NSA 9-12
  • RCC-TG IRIG 106-07

Triton Series drives also offer Opal AES256 compliant disk encryption.

Environmental Hardening

Comtech SSD drives are developed and independently tested to stringent criteria.

  • High Altitude: Operation at 80,000 feet
  • Mechanical Shock:
    • Operation ─ 40G@ 11ms, 3x in 6 directions
    • Fragility ─ 1,500G@ 0.5ms, 3x in 6 directions
  • Random Vibration: Operating ─ 16Grms, 20Hz to 2KHz, 1 hour per axis, 3 axes
  • Temperature Shock: -40°C to +85°C, 10 cycles

Additional Options:

  • Silicone Gel Fill Polymer encapsulates PCB assembly to provide immersion resistance and resist mechanical shock and dynamic vibration
  • Conformal Coating ─ Thin film of silicone elastomer provides additional moisture resistance.
  • Component Staking ─ Epoxy anchors components to increase resistance to shock and vibration.